The
Computer Aided design (CAD) is a Process use of Computers and software’s to aid
in the creation, Modification, Analysis, or Optimization of a design.
Module 1: Introduction to CAD and this CAD part gives knowledge and skills on
2D and 3D Drafting.
Module 2: It describes about 2D and 3D Modelling, Modelling of Curves, Solids,
Mechanisms and Assemblies. In this course also explains the Hardware and
Software of CAD.
Module 3: It describes the CAD Display devices, Principles and Techniques of
CAD display devises, Input and Output devices, Wireframe & Solid Modelling
and its techniques, Operations, Comparison of wireframe & solid Modelling
and Applications of CAD.
Computer Aided Manufacturing (CAM) is a Process is the use of computer and
software to operate and control machine tools and facilitate the manufacturing
of workpieces and products.
Module 4: Introduction of Computer Aided Manufacturing (CAM) and
gives knowledge and skills on the Numerical Control (NC) & Computer
Numerical Control Machines (CNC).
Module 5: It describes the Principles of CNC and Coordinate Systems, Motion
Control, working and operation of CNC, Advantages and disadvantages of CNC
machines.
Module 6: It describes the various manufacturing systems as Flexible
Manufacturing Systems (FMS), Components and types, approaches, layouts,
problems, advantages and disadvantages. Also discussed about Automated Guided
Vehicle Systems (AGVS), Types and control systems, charging and guidance
methods, safety elements and task allocation and Computer Inventory Control,
Management information Systems (MIS), Functions, storages and Decision support
systems (DSS) components and benefits. Also discussed about Robotics, Types of
Robots and features, robot anatomy, defining parameter, control systems and
robot applications.
Course Credit: 2
| Course Status : | Ongoing |
| Course Type : | Core |
| Language for course content : | English |
| Duration : | 6 weeks |
| Category : |
|
| Credit Points : | 2 |
| Level : | Diploma |
| Start Date : | 01 Jan 2025 |
| End Date : | 30 Apr 2025 |
| Enrollment Ends : | 28 Feb 2025 |
| Exam Date : | 18 May 2025 IST |
| Exam Shift : | Shift-II |
Note: This exam date is subject to change based on seat availability. You can check final exam date on your hall ticket.
|
Week 1 |
Introduction to
Computer Aided Design (CAD) |
|
Week 2 |
2 D & 3 D
Modelling and CAD Functions & Applications. |
|
Week 3 |
Display Devises,
Working Principles and its various Techniques. |
|
Week 4 |
Introduction to CAM. |
|
Week 5 |
Working Principles
of NC & CNC Machines. |
|
Week 6 |
Advanced
Manufacturing Systems & its Applications |
Dr. K.Tamil Mannan is working as
Associate Professor, Mechanical Engineering, School of Engineering and
Technology, Indira Gandhi National Open University (IGNOU), New Delhi. He has
23 Years’ Experience in Teaching at State and Central Universities and One Year
Experience in Industry. He has published in more than 50 publications in
Reputed International Journals & International and National Conferences.
Also, He has Produced 03 PhD Research Scholars. He has recipient of Best
Entrepreneur Cell Coordinator Award 2016 by SEED, Chennai, Creative Innovation
Award 2016 awarded by ECONS, New Delhi and Best Skill Development Coordinator
Award 2017 by SEED, Chennai for Skill Development Projects. He has completed
IGNOU-ISTE Collaborative Projects on Skill Developments and also initiating
Project Proposal in Skill Development Programmes. Also, He is the Expert member
of Evaluation Accreditation Committee in National Board of Accreditation, New
Delhi. He has organized and Participated in various Workshops, Short Term
Training Programmes and Faculty Training Programmes sponsored by TEQIP, ISTE,
New Delhi & AICTE, New Delhi.
Work Experience:
|
S. No. |
Teaching in State and Central Universities (Years) |
Industry (Years) |
|
01 |
22 |
01 |
|
Si No |
Acted |
Name of the Event |
Year |
|
01 |
Keynote Address Chair |
International Conference on Electronics, Computer and Manufacturing
(ICECME 2016), |
11-12, May, 2016 Nanyang Technological University, Singapore |
|
02 |
Technical Session Chair |
International Conference on Electronics, Computer and Manufacturing
(ICECME 2016), |
11-12, May, 2016 Nanyang Technological University, Singapore |
FELLOWSHIP/ AWARDS:
|
Sl.No. |
Name of the Fellowship/Awards |
Granting/ Awarding Institution |
Year |
|
1. |
Creative Innovation Award |
Econs Education Submit and Award 2016, ECONS, New Delhi |
2016 |
|
2. |
Best Entrepreneurship Cell Coordinator |
Sustainable Institute Industry Partnership (SIIP - 2016)– Individual
Award Society for Educational & Entrepreneurship Development (SEED),
Chennai |
2016 |
|
3. |
Best Skill Development Cell Coordinator |
6th National Submit on Education, Employability, Employment and
Entrepreneurship. Society for Educational & Entrepreneurship Development (SEED),
Chennai |
2017 |
PUBLICATIONS:
BOOKS: 3 (authored) = 3
RESEARCH PAPERS PUBLISHED: 62
Research Papers in Peer Reviewed Journals: 23
Papers presented at International/ National
Conferences: 39
MEMBERSHIP OF PROFESSIONAL BODY/ STATUTORY
BODY (INTERNAL/ EXTERNAL):
|
Membership of Professional body/ Statutory body |
Name of statutory body/ institution |
Period |
|
Life Member, [ LM-29730] |
Indian Society for Technical Education |
Life Period |
|
Life Member, [ LM-120] |
Association of Mechanics and Machines |
Life Period |
|
Life Member, [ LM-164541] |
International Association of Engineers |
Life Period |
|
Life Member, [LT-542] |
Centre for Education Growth and Research |
Life Period |
|
Life Member, [ PM-034] |
Integrated Chambers of Commerce and Industry |
Life Period |
DOWNLOAD APP
FOLLOW US